2025

NovaStar VX600 Pro Setup Guide: Software, Mapping & Backup

December 25, 2025|Blog, LED Controller System|

To set up the NovaStar VX600 Pro, confirm your cabinet pixel dimensions, connect the video source and LED output cables, configure the receiving cards and screen connections, then assign and scale a layer. Save the working configuration and test it after restarting. Use Unico for device and presentation control, and [...]

NovaStar H5 Video Wall Splicer: Specs & Setup Guide

December 5, 2025|Blog, LED Controller System|

NovaStar H5 is a modular 5U video wall splicer that combines video processing with LED sending when fitted with compatible sending cards. It can also feed external display systems through video output cards. The right configuration depends on source formats, wall pixel count, output topology and simultaneous layers—not simply whether [...]

Colorlight VX20: 4K Specs, Pixel Capacity & Setup Guide

November 24, 2025|Blog, LED Controller System|

The Colorlight VX20 is an LED video processor and sender for stage and fixed-installation systems. Colorlight's V1.3 specification lists 20 Gigabit LED outputs, a maximum 13.0-million-pixel load at 8-bit/60Hz, and six DL layers. Select it from the actual wall matrix, source formats, output depth and frame rate, then verify the [...]

Comprehensive Review Of NovaStar VX1000 Pro Video Wall Controller

November 19, 2025|Blog, LED Controller System|

NovaStar VX1000 Pro combines video processing and LED sending, with ten Ethernet outputs and up to 6.5 million output pixels. It suits projects that need compatible 4K inputs, flexible source layouts and configured backup. Size the LED wall by its native pixels and port map; 4K input capability does not [...]

Go to Top