EA-Flex Indoor Flexible LED Display
EA-Flex is an indoor flexible LED display system with soft magnetic modules for curved walls, columns and shaped architectural surfaces. Select the exact module format and pixel pitch, then confirm bend limits, support geometry, content mapping and service access for the project.
Customized New LED Display Solutions for You
EA-Flex Indoor Flexible LED Display
EA-Flex is an indoor flexible LED display system with soft magnetic modules for curved walls, columns and shaped architectural surfaces. Select the exact module format and pixel pitch, then confirm bend limits, support geometry, content mapping and service access for the project.
- Indoor flexible LED modules; published protection is IP31.
- Formats and pixel maps vary by pitch, so order the exact module version.
- Magnetic front module service still requires access to power, control and cabling.
- Confirm the practical bend radius and mounting drawing for the selected module; an angle claim alone is not a complete installation design.
On this page
- Compare flexible module formats at P2
- Flexible Modules in Multiple Sizes
- Magnetic Front-Service Maintenance
- High-Refresh Indoor Image Performance
- EA-Flex Series Indoor Flexible LED Screen (240x120mm) Parameter
- EA-Flex Series Indoor Flexible LED Screen (256x128mm) Parameter
- EA-Flex Series Indoor Soft Flexible LED Screen (320x160mm) Parameter
- EA-Flex Series Indoor Soft Flexible LED Screen (250x250mm) Parameter
- EA-Flex Series Indoor Soft Flexible LED Screen(300x168.75mm)Parameter
- Purchase questions
Compare flexible module formats at P2
| Published format | P2 module pixel map | Brightness | Maximum power per m² |
|---|---|---|---|
| 240 × 120 mm | 120 × 60 | 700 cd/m² | 300 W |
| 256 × 128 mm | 128 × 64 | 800 cd/m² | 300 W |
| 320 × 160 mm | 160 × 80 | 650 cd/m² | 300 W |
These P2 examples come from different published module tables. Equal nominal pitch does not make module footprints, scan modes, connectors or supporting frames interchangeable; specify the complete module model and receiving-card configuration in the order.
For a column or curved wall, provide dimensioned plan and elevation drawings, the desired radius, closest viewing positions and intended artwork. Ask for the module orientation, support surface and removal route to be reviewed before fabrication.
Give the content supplier a confirmed pixel map, seam positions and playback orientation for the assembled shape. A curved physical surface can require mapped creative files and control calibration rather than a standard flat-video layout.
Purchase questions
What should an indoor flexible LED display quote include?
Specify the geometry, module format and pitch, support fabrication scope, power distribution, controller, cable access, calibration and spare modules. Include installation conditions and how the display must be serviced after it is built.
Does front module service mean every component needs no rear space?
Magnetic modules support access from the display face. Confirm the replacement route for power supplies, receiving cards and cables separately, especially inside a closed column or a wall-mounted curved structure.
Can EA-Flex be installed outdoors or bent to any radius?
The published series is for indoor use with IP31 protection. Confirm the selected module’s bend limit and approved support geometry; do not specify outdoor exposure or an unverified radius from flexibility alone.
Request an EA-Flex geometry quote
Compare the flexible soft LED module range for other formats.
Flexible Modules in Multiple Sizes
EA-Flex modules are available in 240 × 120, 200 × 150, 256 × 128, 320 × 160, 250 × 250 and 300 × 168.75 mm formats, depending on pixel pitch. The flexible module formats adapt to curved structures and space-constrained indoor installations.
Flexible Design with Up to 45° Bend
Flexible PCB and soft module construction allow concave, convex, cylindrical and wave-shaped surfaces, with a specified bend angle up to 45°. Confirm the final radius and supporting structure for the selected module format and pixel pitch.
Custom Shapes for High-Impact Installations
EA-Flex turns columns, arcs and irregular architectural surfaces into continuous digital canvases, giving designers more freedom than flat LED cabinets. It suits projects where the display shape is part of the visual concept.
Magnetic Front-Service Maintenance
Magnetic modules are removed from the front for module-level service, so routine access does not require a rear maintenance corridor. This simplifies integration on columns, curved walls and other space-constrained structures.
Fast Installation and Precise Module Alignment
Magnetic mounting reduces mechanical fasteners at the module interface and speeds alignment on a prepared structure. Precise frame fabrication and module calibration are still required for consistent module alignment and image uniformity.
High-Refresh Indoor Image Performance
Across the listed configurations, EA-Flex provides a ≥3,840 Hz refresh rate, 14-bit grayscale and a 140° viewing angle; brightness is 600–800 cd/m² depending on model. Pixel pitches from P0.9 COB to P5 support close-view fine-pitch content and larger indoor creative displays.
Flexible LED Display Applications
EA-Flex is designed for indoor retail, hotels, exhibitions, showrooms, stages and architectural features such as columns, curved walls and wave-shaped displays. Select pixel pitch, module format, supporting structure and content resolution from the viewing distance and installation geometry.
EA-Flex Series Indoor Flexible LED Screen (240x120mm) Parameter
EA-Flex Series Indoor Flexible LED Screen (256x128mm) Parameter
EA-Flex Series Indoor Soft Flexible LED Screen (320x160mm) Parameter
EA-Flex Series Indoor Soft Flexible LED Screen (250x250mm) Parameter
EA-Flex Series Indoor Soft Flexible LED Screen(300x168.75mm)Parameter
EA-Flex Flexible LED Display FAQ
What is the EA-Flex flexible LED display?
EA-Flex is an indoor flexible LED display system built from soft magnetic modules. It forms concave, convex, cylindrical, column and wave-shaped screens for creative fixed installations.
Which module sizes and pixel pitches are available?
Listed module formats include 240 × 120, 200 × 150, 256 × 128, 320 × 160, 250 × 250 and 300 × 168.75 mm. Available pixel pitches range from P0.9 COB to P5, depending on the selected module size.
How flexible is the EA-Flex LED module?
The module is specified for a bend angle up to 45°, enabling concave, convex and cylindrical surfaces. The practical radius depends on module format, pixel pitch and the supporting structure, so it should be confirmed during project engineering.
Is EA-Flex a front-service LED display?
Yes. Magnetic modules are accessed from the front for module-level replacement, reducing the need for a rear maintenance corridor in space-constrained indoor installations.
What visual performance does EA-Flex provide?
The listed configurations specify a ≥3,840 Hz refresh rate, 14-bit grayscale and a 140° viewing angle. Brightness ranges from 600 to 800 cd/m² depending on the model, supporting smooth indoor playback and off-axis viewing.
How should I choose the right pixel pitch?
Choose pixel pitch from the minimum viewing distance, screen dimensions, content detail and required total resolution. Closer viewing and data-dense content generally require a finer pitch, while larger viewing distances can use a wider pitch.
What shapes can be built with EA-Flex modules?
EA-Flex modules can form curved walls, cylinders, columns, arcs, waves and other custom indoor surfaces within the specified bend limit. A precisely fabricated support structure is required to maintain alignment and a consistent viewing surface.
Where is the EA-Flex flexible LED display typically used?
Typical applications include shopping malls, hotels, exhibition stands, showrooms, stages and architectural features where a conventional flat cabinet cannot follow the required geometry.
What are the operating conditions and power requirements?
The parameter tables specify AC 100–240 V, 50–60 Hz input, 300 W/m² published maximum power consumption and model-specific operating ranges: −20 °C to +50 °C for the 250 × 250 mm group and −20 °C to +60 °C for the other listed groups and IP31 protection. EA-Flex is intended for indoor use, so ventilation and site humidity should be considered during system design.
