Mooncell LED Software Downloads

Mooncell LED software downloads: choose AutoLED for screen configuration, T6 Controller for a supported T6 system, or M3 Studio/Ledmagic for a supported media-player workflow. Below you can download software, user manuals and controller specifications, then check the firmware requirements for your exact device.

Resource check: 10 October 2026. Maintained by EagerLED. Software versions and document revisions were checked against Mooncell’s official English and Chinese download catalogs. Catalog dates are listing dates, not guaranteed release dates. EagerLED runs this resource library independently of Mooncell.

Mooncell LED software download: AutoLED, T6 and Ledmagic

Match the program to the hardware and task before downloading. A screen-configuration program, a content player and a device firmware package serve different purposes. Check the controller label and the working software version first. On a phone, swipe sideways in a table to see all columns.

For downloads with multiple parts: download every numbered ZIP, extract them into one folder, and open the EagerLED assembly helper included in part 1. It joins the parts and checks the original installer’s SHA-256 checksum; it does not run the installer. Follow the included README. These wrappers were prepared by EagerLED and preserve the original installer bytes. T6 uses a single ZIP. A successful download does not confirm compatibility with every Mooncell controller.

M3 Studio software: V4 and V3 branches

Mooncell maintains separate M3 Studio branches. The Android V4 and V3 catalog entries were updated on 8 October 2026. Use the branch supported by your player and existing deployment.

M3 Studio V4 Windows is provided in seven ZIP parts because the original installer is approximately 583 MB. Download all parts and follow the README in part 1 to restore it. For Android packages: download every ZIP part to a Windows PC, extract them into one folder, and use the included assembly helper to restore the original APK and check its checksum. Then transfer the APK to your supported Android device and follow its installation instructions. Do not install individual part files. Entries marked “Request” are identified in the official catalog but are not direct downloads from this page. No third-party download links are used.

The M3 Studio PC V4 manual identifies compatibility with HallPlayer V4.0.16 or later. The V4 Cloud Platform manual states M3 Studio PC V4.0.16 or later and mobile app V4.0.10 or later. These manual minimums do not guarantee that every device can change software branch.

Mooncell user manuals and configuration guides

Download the manual that matches the software family and controller model. A document revision such as V3.0.2 is separate from a software installer version.

“English catalog” identifies the source catalog for a document; check the PDF itself for its supported language. The official listing labeled M3 Studio APP V4 links to the same PC manual file, so it is not presented here as a separate Android manual.

Mooncell controller, receiving-card and server specifications

The following PDFs add newer controller and receiving-card resources to the library. Match the complete model name, including suffixes such as -D, -2 or Pro. A specification revision describes a document, not a firmware version.

Looking for an older MP1, MP2, MB4, MB6, MBR16 or MC75E resource? Send EagerLED the complete model and hardware revision so we can match the correct document and software. Older resource links are not labeled as current releases.

Mooncell firmware and system updates

Firmware availability: no model-specific standalone firmware package was verified in the official public catalogs reviewed on 10 October 2026. We do not label a PC installer, APK or product specification as firmware.

The M3 Studio PC V4 manual, section 9.4 “Device Upgrade,” separates System Upgrade from APK Installation. Its System Upgrade instructions require checking the ZIP file against the device and installing the correct files. The ZIP extension alone does not establish compatibility.

• Record the exact controller/player or receiving-card model, hardware revision and current firmware/system version.
• Confirm the supported software branch and upgrade path with the supplier before installation.
• Back up the working screen configuration and use the connection and power conditions specified for the update.

Download the official M3 Studio PC V4 device-upgrade manual (PDF) · Download EagerLED’s firmware update checklist (TXT)

Request a model-specific firmware or system update package from EagerLED. Include a photograph of the device label and a screenshot of the current version. The checklist is an EagerLED support aid, not official Mooncell firmware.

How to choose and install Mooncell LED software

1. Identify the hardware. Read the controller label and record the current software and system version.
2. Choose the family and branch. Use AutoLED for configuration or the supported media-player/server software for content management. Confirm V3 versus V4 where relevant.
3. Download the matching manual and package. Extract software ZIP files and follow the installation steps for your operating system.
4. Connect and test. Follow the manual’s USB or network procedure, check device detection, and save the working configuration before changing parameters.

For background on system components, read our LED control system guide. For a broader workflow, see the EagerLED Mooncell software guide; use the version table on this page for the current catalog check.

Watch the existing tutorials: Mooncell software tutorial 1 and Mooncell software tutorial 2. Video interfaces may reflect an older software version; follow the manual for your installed branch.

Mooncell software download FAQs

Which Mooncell LED software should I download?

Use AutoLED for screen configuration and commissioning, T6 Controller for a supported T6 system, and M3 Studio or Ledmagic for supported media-player workflows. Confirm the controller model, software branch and operating system before installation; these programs are not interchangeable.

Is AutoLED V3.0.2-EN a software installer?

No. The official AutoLED_V3.0.2-EN.pdf is an English user manual. The Windows installer listed here is AutoLEDSetup V3.115.144. Manual revision numbers and installer versions describe different files.

What is the current M3 Studio version listed by Mooncell?

At our 10 October 2026 catalog check, Mooncell listed M3 Studio V4 Windows 4.3.6 and V4 Android 4.3.14. The separate V3 branch listed Windows 3.6.13 and Android 3.2.7. Choose the branch supported by your device rather than switching solely because a number is higher.

Can I download Mooncell firmware from this page?

No standalone model-specific firmware binary was verified in the official public catalogs reviewed. This page provides the M3 Studio device-upgrade manual and an EagerLED firmware checklist. Request a package matched to your model, hardware revision and current system version before upgrading.

Why will the software not connect to my LED controller?

Check the controller power, selected connection method, cable or network link, and device/software compatibility. For an Ethernet connection, confirm the PC and controller network settings required by the manual. Record the model and error message before asking EagerLED for help; avoid a factory reset until the working settings are backed up.

Are the downloads hosted on an official Mooncell website?

The downloadable files on this page are hosted on LED Screen Board. The software and product PDFs were sourced from Mooncell’s official download catalog; the firmware checklist was prepared by EagerLED. EagerLED operates this resource page independently of Mooncell.

Need help matching a download to your LED screen?

Contact EagerLED for Mooncell download support. Send the model label, current version, operating system and the issue you are trying to solve. This helps us identify the correct software, manual or upgrade package.

Older Mooncell software, manuals and model specifications

These existing resources are retained for older installations. They have not been reverified as current releases. Start with the dated software and document tables above; contact EagerLED if an archive file is unavailable or you need a model-specific update.

Legacy software packages

• Ledmagic Setup 2.6.4
• Ledmagic Setup 2.5.11 (64)
• Ledmagic Setup 2.5.11 (32)
• AutoLEDSetupV3.72.12
• T6 Controller V3.1.26
• LED Display Controller V3.2.9(Chinese Simplified)
• MCLEDPlayerV2.9.166 (Multi-Language Release )
• MCLEDPlayer_Setup_1.0.5_03131715
• C2 Server
• Calibration Software Server

Legacy manuals and specifications

• Ledmagic Software User Manual (PC Version)
• Ledmagic APP User Manual
• V2 Cloud Platform User Manual
• AutoLED User Manual
• Network Media Player APP Operating Instructions
• FloorLED Software User Manual
• M10D — V4.0
• A703 — V4.0
• A704 — V4.0
• A712-B — V4.0
• A4X — V4.0
• L8S — V4.0
• L8S-D — V4.0
• DY75-8 — V4.0
• L4S_PRO — V4.0
• A75EL — V4.0
• MVB12ES — V4.0
• MVB4SV — V3.1
• B1200ES — V4.0
• B2000ES — V4.0
• B2000ES-FOT — V4.0
• B200S — V4.0
• B4000ES — V4.0
• B600S — V4.0
• B800ES — V4.0
• MBR16 Asynchronous Control Card — V4.0
• MC75E 2IN1 LED Display Controller — V4.0
• STH100 Temeprature&Humidity Sensor Specs — V3.0
• FOT2000 — V4.0
• M-EMT100 — V3.0
• M-MFN02 — V3.1
• SPC100 — V3.0
• SSD Smoke Fog Sensor Specification — V3.0
• SPC100 — V4.0
• SPS10 — V4.0
• SPS100 — V4.0
• SPS200 — V4.0
• TC-400N4 — V4.0
• TC-710N1 — V4.0
• MB4 — V4.0
• MB6 — V4.0
• MBR16 — V4.0
• MC75E — V4.0
• MP1 — V4.0
• MP2 — V4.0
• MP4 — V4.0
• MP401 — V4.0
• MC-C2 — V3.1
• MC-C2K — V4.0
• MC-C2KX — V4.0
• MC-C2KXE — V4.0
• MC-C2KXL — V4.0
• MC-C2KXS — V4.0
• MC-C2X — V4.0
• MC2K — V4.0
• MC4K — V4.0
• MC8K — V4.0
• MC8K-Pro — V4.0