EA960SP5 Stadium LED Screen Board

EA960SP5 Stadium LED Screen Board

  • Stadium LED screen board for pitch-side advertising

  • Angle adjustable from 60° to 90°

  • Cushioned top edge and soft LED face mask

  • Weatherproof: IP65 front, IP54 rear

  • Choice of P5, P6.67, P8 or P10

  • 3840Hz+ refresh for flicker-free broadcasts

  • 28 kg 960×960 mm cabinets, serviced from behind

Customized New LED Display Solutions for You

LED Screen Board Built for Stadium Perimeter Advertising

The EA960SP5 LED screen board is designed for the advertising line that runs around football pitches and sports fields. Each 960×960 mm cabinet works as a modular unit, so boards can be lined up to any perimeter length. With P5, P6.67, P8 and P10 versions, venues can balance image detail, viewing distance and project budget, from close-range training grounds to large league stadiums.

EA960SP5 stadium LED screen board for perimeter advertising

Set the Viewing Angle from 60° to 90°

Every LED screen board cabinet stands on its own rear bracket, which tilts between 60° and 90°. Installers can lean the boards back for spectators in low stands or keep them more upright for high tiers and TV cameras. Because the angle is set cabinet by cabinet, a long perimeter run can follow the curves and corners of the pitch while keeping a consistent face toward the audience.

EA960SP5 Adjustable Rear Support

Safer Pitch-Side Contact with Soft Cushioning

Players and balls often hit perimeter boards during a match. The EA960SP5 adds a soft cushion along the top edge and a flexible mask over the LED face. Together they soften accidental contact and shield the LED lamps from direct impact, which helps reduce dead pixels and keeps the LED screen board in service through a full season of games.

EA960SP5 Impact Resistant Design

Service Everything from Behind the Board

Opening rear covers give technicians direct access to power supplies, receiving cards and modules. Inspection and repairs are carried out from the back, so the front display surface does not need to be removed and the advertising line can return to operation quickly between matches. Leave a service corridor behind the boards when you plan the installation.

EA960SP5 Rear Maintenance

Modular 960×960mm Cabinets That Are Easy to Handle

The square 960×960 mm format makes it simple to calculate board length and to combine cabinets into continuous perimeter runs. At about 28 kg per cabinet, with integrated handles on each side, two installers can lift, place and remove units quickly. This shortens LED screen board setup time before an event and makes it easier to store the boards between seasons.

EA960SP5 Cabinet Details

Weather Protection for Open-Air Venues

An outdoor LED screen board stays exposed to sun, rain and dust. The front of the cabinet carries an IP65 rating and the rear an IP54 rating, and the system runs from -20 °C to +60 °C. For permanent installations, plan drainage and cable entry on the rear side, since it has a lower protection level than the display face.

EA960SP5 Outdoor Protection

Bright, Flicker-Free Images for Fans and Cameras

Brightness of 5,500–6,000 cd/m², depending on configuration, keeps sponsor logos and live content clear even in direct afternoon sun. A refresh rate of at least 3,840 Hz helps prevent scan lines and flicker on broadcast and smartphone cameras, so the LED screen board looks clean on TV as well as in the stands. Final results also depend on camera shutter settings.

EA960SP5 Display Effect

Planning Your Stadium LED Screen Board Project

Start with the spectator distance and the type of content you plan to show. Finer pitches such as P5 suit close seating and detailed graphics, while P8 and P10 are cost-effective for large stadiums viewed from farther away. Then confirm the total board length, mounting surface and rear service space, and our team can recommend a matching configuration.

EA960SP5 Stadium Perimeter LED Board

EA960SP5 Stadium LED Screen Board Parameter

Pixel PitchP5 SMD1921P5 SMD2727P6.67P8P10
ModelEA960SP5-P5EA960SP5-P5EA960SP5-P6.67EA960SP5-P8EA960SP5-P10
Pixel ConfigurationSMD1921SMD2727SMD3535SMD3535SMD3535
Density (Pixels/㎡)40,00040,00022,47815,62510,000
Module Resolution (Pixel)64x3264x3248x2440x2032x16
Module Size (mm)320x160320x160320x160320x160320x160
Driving Mode (Duty)1/81/81/61/51/2
Cabinet Size (mm)960x960960x960960x960960x960960x960
Cabinet Weight (KG)2828282828
Brightness (CD/㎡)5,5006,0006,0005,5005,800
Viewing Angle (°)140140140140140
Gray Grade (Bits)1414141414
Operation PowerAC100-240V 50-60HzAC100-240V 50-60HzAC100-240V 50-60HzAC100-240V 50-60HzAC100-240V 50-60Hz
Max. Power Consumption (W/㎡)550650650650630
Avg. Power Consumption (W/㎡)185220220220210
Frame Frequency (Hz)≥60≥60≥60≥60≥60
Refresh Frequency (Hz)≥3840≥3840≥3840≥3840≥3840
Working Temperature (ºC)-20~+60-20~+60-20~+60-20~+60-20~+60
Protection GradeIP65 (front), IP54 (rear)IP65 (front), IP54 (rear)IP65 (front), IP54 (rear)IP65 (front), IP54 (rear)IP65 (front), IP54 (rear)

EA960SP5 Stadium LED Screen Board FAQ

What pixel pitches are available for the EA960SP5 stadium LED screen board?
EA960SP5 is available in P5 (SMD1921 or SMD2727), P6.67, P8 and P10.
What is the cabinet size and weight of EA960SP5?
Each LED screen board cabinet measures 960×960 mm and weighs about 28 kg, with 320×160 mm modules.
Can the viewing angle of the perimeter LED board be adjusted?
Yes. The rear support adjusts between 60° and 90° to set the screen angle for the pitch-side layout.
How does EA960SP5 protect players and LEDs from impact?
A soft top cushion and flexible LED mask on the LED screen board help cushion accidental contact and protect the LED lamps.
Is EA960SP5 waterproof for outdoor stadiums?
The cabinet is rated IP65 at the front and IP54 at the rear, and works from -20 °C to +60 °C.
Where is the EA960SP5 LED screen board used?
It is designed for perimeter advertising in football stadiums, sports fields and other outdoor sports venues.