Customized New LED Display Solutions for You
EA500H7 Rental LED Display for Events
EA500H7 is a 500 × 500 mm rental LED display panel for event equipment buyers building flat or curved walls. Choose a matched indoor or outdoor configuration, then define the wall grid, control equipment, service workflow and transport package for your fleet.
- Published cabinets are 500 × 500 mm and 7 kg across the listed configurations.
- Indoor IP31 models and outdoor IP65 models have separate LED and power specifications.
- Quick locks, curve locks and foldable corner protection support repeated event builds.
- Confirm curve limits and full spare compatibility for the exact ordered version.
On this page
Compare indoor and outdoor EA500H7 panels
| Use / version | Brightness (cd/m²) | Maximum / average power (W/m²) |
|---|---|---|
| Indoor P1.95 GOB / P2.6 GOB / P2.97 | 750 | 350 / 120 |
| Outdoor P2.6 | 4,500 | 500 / 170 |
| Outdoor P2.97 | 4,500 | 550 / 185 |
| Outdoor P3.91 | 4,800 | 580 / 220 |
For a flat wall, a 6 × 4 cabinet grid gives a nominal 3 × 2 m surface, 24 panels and 168 kg of cabinet weight. An 8 × 6 grid gives 4 × 3 m, 48 panels and 336 kg. These calculations exclude mounting, cables and flight cases.
Use the indoor GOB options only in the conditions approved for those modules; the table lists IP31 indoors. For outdoor panels, confirm protection at the front, rear and cable connections in the installation drawing rather than treating the single IP65 table entry as a complete site design.
Build the order around an exact module/scan/receiver/connector combination and the planned service inventory. Equal cabinet dimensions alone do not establish compatibility with another rental series.
Purchase questions
Does “rental LED display” mean short-term hire here?
This is a product page for purchasing panels for a rental or production fleet. State the screen sizes you regularly build and the working environment so the equipment package can match those uses.
How do I specify a curved or cylindrical wall?
Provide the required radius or diameter, curve direction and viewing positions. Ask for approved lock settings, cabinet quantities, support and pixel mapping; do not assume an unrestricted bend angle.
What should I ask for besides panels?
Confirm the controller, receiving-card configuration, power and signal cables, mounting accessories, transport cases, spare modules and power boxes, and the commissioning/maintenance scope.
Request an EA500H7 panel package
Compare the rental LED screen equipment for other formats.
EA500H7 Indoor and Outdoor Rental Panel Specifications
EA500H7 LED Display for Rent FAQ
What size is the EA500H7 rental LED display?
Each EA500H7 cabinet measures 500×500mm. Cabinets join on four sides to create LED walls in the width and height required for the venue.
Can EA500H7 build curved LED walls?
Yes. Adjustable curve locks connect cabinets at controlled angles for concave, convex and cylindrical display layouts.
Is EA500H7 suitable for outdoor events?
The outdoor EA500H7 variants are listed with IP65 protection; indoor variants are IP31. Confirm the selected model, rear connections and installation conditions before outdoor use.
How fast can EA500H7 be installed?
Dual quick locks and modular cabinets streamline alignment and removal. Actual installation time depends on wall size, support structure and crew planning.
What viewing angle does EA500H7 provide?
EA500H7 provides a 140° viewing angle, helping audiences see clear content from wider positions across an event space.
Where is EA500H7 commonly used?
Common applications include concerts, conferences, film production, exhibitions and indoor or outdoor rental events.











